What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Red Devil Fireplace & Stove Silicate Cement, Cartridge, 0466-09/25/2013
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaRed Devil Fireplace & Stove Silicate Cement is a non-flammable, silicate based compound that sets rock hard when fired. The textured paste adheres well to fire brick, cinder block, metal and mortar. It cures with a warm fire and provides a durable, long lasting seal that withstands temperatures up to 1000 deg F. or use on Fireplaces, Wood-burning Stoves, Flues, Concrete Ovens, Chimney Joints, and Ash Pit Doors.
Purpose of product.
Usage: High temperature masonry cement.Structure such as solid, liquid, aerosol etc.
Form: pasteDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 14, 20244175 Webb Street
Pryor OK 74361
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Chemical of Concern (CoC)
Chemical of Concern(CoC)Sodium silicate 001344-09-8 45.0-55.0 No Quaternium-18 bentonite 068953-58-2 40.0-50.0 No Diatomite 068855-54-9 40.0-50.0 No Non-hazardous ingredient(s) 999999-57-5 <10 No Perlite 093763-70-3 <2.5 No Carbon black 001333-86-4 <0.05 Yes 
CoC List
-
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Safety Data Sheet (SDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Safety Data Sheet(SDS) Date that the Safety Data Sheet (SDS) was issued by manufacturer of a specific product.
SDS DATE :September 25, 2013 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING2 0 0 -
V.O.C Information
Volatile Organic Compounds g/L With Solvent : <10
Measure of Alkalinity/Acidity of substance or preparation where a level of 7 is considered as neutral.
pH Levels10.0-12.0 -
Warnings
Hazard Statements
Danger. May be harmful if swallowed. Causes severe skin burns and eye damage.
Precautionary Statements
Prevention
Do not breathe dust/fume/gas/mist/vapors/spray. Wash face, hands and any exposed skin thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection Use only outdoors or in a well-ventilated area
Response
Immediately call a POISON CENTER or doctor/physician.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF SWALLOWED: rinse mouth. Do NOT induce vomiting
Storage
Store locked up. Store in a well-ventilated place. Keep container tightly closed
Disposal
Dispose of contents/container to an approved waste disposal plant. -
Acute health effects
From SDS:
Emergency Overview
Danger. May be harmful if swallowed. Causes severe skin burns and eye damage.
Potential Health Effects
Eye Contact: Causes severe eye damage.
Skin Contact: Causes severe skin burns; Prolonged and frequent contact may cause redness and irritation. Repeated skin contact may cause dermatitis.
Inhalation: Unlikely, due to paste consistency.
Ingestion: May be harmful if swallowed; Ingestion causes burns of the upper digestive and respiratory tracts. -
Chronic health effects
From SDS:
Prolonged or repeated skin contact may result in dermatitis (red, dry skin). Exposed individuals may experience eye tearing, redness and discomfort. Irritating to mouth, throat, and stomach if ingested. May cause gastrointestinal irritation, nausea, diarrhea, and vomiting. -
Carcinogenicity
IARC Group 3: CAS No. 068953-58-52 & CAS No. 068855-54-9; Silica and Clay Blend
IARC Group 2B: Carbon Black CAS No. 001333-86-4
ACGIH A3: Carbon Black CAS No. 001333-86-4
OSHA Listed: Carbon Black CAS No. 001333-86-4 -
Handling information
Keep out of reach of children and pets. Do not take internally. Do not breathe vapors. Use only w/ adequate ventilation. Wash thoroughly after handling. Avoid contact w/ eyes, skin and clothing. Open windows and doors to ensure cross-ventilation and fresh air during application and curing. Do not eat or drink while handling this material. Stable under normal conditions of handling, use and storage. Store containers in a cool, dry location, away from direct sunlight and high temperatures. Protect from freezing. Store away from incompatible materials. Close container after each use and keep tightly closed when not in use. To maximize shelf life, store at temperatures below 26C (80F). Store locked up.
-
Disposal information
Disposal should be in accordance with applicable regional, national and local laws and regulations.
-
California Prop. 65 Warning
Listed carcinogen: Carbon Black CAS No. 001333-86-4
-
First Aid
Eye Contact: Immediately flush w/ large quantities of water for at least 15 minutes until irritation subsides. Get medical attention. Eye damage may be severe, if not immediately removed.
Skin Contact: Wash w/ soap and water for at least 15 minutes. Get medical attention if symptoms persist. Remove and wash contaminated clothing.
Inhalation: Remove to fresh air. If breathing difficult, leave area to obtain fresh air. If breathing remains difficult, get medical attention. Inhalation unlikely, as product is a paste.
Ingestion: Ingestion highly unlikely. Do not induce vomiting unless directed by medical personnel. If vomiting occurs, lean patient forward to maintain an open airway and prevent aspiration. Get immediate medical attention.
General Advice: Provide this SDS to medical personnel for treatment.
-
UN Global Harmonization Classification
